DigiPara Liftdesigner

Online Training Modules

Online training with DigiPara

In order to be able to train our DigiPara Liftdesigner users individually and simply as directly as possible in their own office, we have divided our entire specialist knowledge into clear modules – these can be booked one after the other depending on each other. There are fixed dates for the individual modules – you can find them in our online shop.

Please note when booking that it is imperative to start with the given basic knowledge. You can find more information on the modular structure, the technical requirements and online booking here.

We would be delighted if, with our support, you will acquire exactly what is most important to you in a few weeks. Good luck and have fun with DigiPara Liftdesigner!

DigiPara Liftdesigner Online Training

A: Fundamentals

Your first steps in Digipara Liftdesigner!

This course aim:

  • Get to know the user interface and basic functions.
  • Create your elevator project and customize according to your requirements.
  • Export your 2D elevator drawings

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:

Scheduled Courses:

  • 12. June 2023, German
  • 21. August 2023, English
  • 06. November 2023, German
  • 20. November 2023, English

Online Training Calendar:

Work on application examples with the DigiPara Liftdesigner!

This course aim:

  • Swap elevator components and customize them using your own values
  • Customize your components by selecting variants
  • Typical use cases within your elevator project (Ex: create door niches).

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals

Scheduled Courses:

  • 13. June 2023, German
  • 22. August 2023, English
  • 07. November 2023, German
  • 21. November 2023, English

Online Training Calendar:

Create your 2D elevator drawing with DigiPara Liftdesigner!

This course aim:

  • Define the contents of your elevator drawing
  • Become familiar with the data tree structure
  • Label your drawing with dynamic comments

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals

Scheduled Courses:

  • 15. June 2023, German
  • 24. August 2023, English
  • 09. November 2023, German
  • 23. November 2023, English

Online Training Calendar:

Learn about the Digipara Liftdesigner database to customize your product library!

This course aim:

  • Understand basic functions of working with data tables
  • Extend the database with your own data sets
  • Learn the basic process for loading new components into the product library

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals

Scheduled Courses:

  • 10. July 2023, German
  • 04. September 2023, English
  • 01. December 2023, English

Online Training Calendar:

A5-Button-c

Your training material >>> coming soon

Use the DigiPara Liftdesigner Cloud as a platform to access manufacturer components.

This course aim:

  • Expand their product library with manufacturer components

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals

Scheduled Courses:

  • not yet scheduled, contact sales

DigiPara Liftdesigner Online Training

B: DigiPara Liftdesigner Drawings

With DigiPara Liftdesigner you can set and arrange any dimension!

This course aim:

  • Customize existing dimensions and create your own dimensions
  • Customize layout settings for dimensions
  • Make your dimensions and views more dynamic

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A3: Drawing Creation Fundamentals

Scheduled Courses:

  • 16. June 2023, German
  • 25. August 2023, English
  • 10. November 2023, German
  • 24. November 2023, English

Online Training Calendar:

Create your individual elevator drawings according to company standards with Digipara Liftdesigner Datamanager!

This course aim:

  • Create dynamic drawing sheet templates for your elevator projects.
  • Use rules to determine what content is displayed on your drawing.
  • Share your drawing sheet templates with others.

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A3: Drawing Creation Fundamentals
A4: Customization Fundamentals
B1: Sheet Templates

Scheduled Courses:

  • 08. September 2023, English
  • 11. December 2023, English

Online Training Calendar:

Customize your all the DWG settings you need!

This course aim:

  • Define your colors, text and dimension styles
  • Define symbols and blocks according to company standards
  • Define your desired layer configurations.

Scheduled Time:
9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A4: Customization Fundamentals

Other Requirements:
Autocad knowledge

Scheduled Courses:

Translate your drawings with DigiPara Liftdesigner!

This course aim:

  • Define translatable texts for your drawings
  • Import and export texts to Excel for external translators

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A4: Customization Fundamentals

Scheduled Courses:

DigiPara Liftdesigner Online Training

C: Common Courses for Elevators and Escalators

Expand your knowledge of the subject "BIM" and the practical use for the elevator industry!

This course aim:

  • Understand the basics of the BIM process
  • Export BIM data and integrate them into architectural software
  • Gain a basic insight into Autodesk Revit

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals

Scheduled Courses:

  • 23. August 2023, German
  • 31. August 2023, English
  • 16. November 2023, German
  • 30. November 2023, English

Online Training Calendar:

DigiPara Liftdesigner Online Training

EL: Elevator Specific Courses

Create your first shaft framework in DigiPara Liftdesigner!

This course aim:

  • Determine your shaft, machine room and floor level materials
  • Learn to place wall openings in a targeted manner
  • Add and place freely definable profiles

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A3: Drawing Creation Fundamentals

Scheduled Courses:

  • 28. June 2023, German

Online Training Calendar

Create shaft groups with DigiPara Liftdesigner!

This course aim:

  • Create and customize shaft groups
  • Customize your drawing sheet template to fit your shaft group
  • Optimize performance for larger elevator projects

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A3: Drawing Creation Fundamentals

Scheduled Courses:

  • 19. June 2023, German
  • 28. August 2023, English
  • 13. November 2023, German
  • 27. November 2023, English

Online Training Calendar

Link your DigiPara Liftdesigner project to an intellectual Excel file!

This course aim:

  • Create simple Excel reports of your elevator (e.g. parts lists)
  • Modify in Excel to control your elevator project
  • Link project parameters to your Excel calculations.

Scheduled Time:

9:00 – 12:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A3: Drawing Creation Fundamentals

Scheduled Courses:

  • 20. June 2023, German
  • 14. November 2023, German

Online Training Calendar:

Automate your CAD models in DigiPara Liftdesigners!

This course aim:

  • Link parameters of your CAD model directly to those from DigiPara Liftdesigners
  • Update your associated production drawings to the CAD model

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals

Scheduled Courses:

  • 11. September 2023, English
  • 13. December 2023, English

Online Training Calendar

DigiPara Liftdesigner makes basic 3D visualization of your cabin a breeze!

This course aim:

  • Configure your cabin
  • Create photorealistic visualizations
  • Define appropriate materials

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals

Scheduled Courses:

  • 22. June 2023, German
  • 29. August 2023, English
  • 15. November 2023, German
  • 28. November 2023, English

Online Training Calendar:

DigiPara Liftdesigner Online Training

PL: Product Loading: “BIM components”

Upload your own BIM components to the DigiPara Liftdesigner database!

This course aim:

  • Learn the first essential steps to load your own BIM components.
  • Extend the DigiPara Liftdesigner database with your BIM components.
  • Create product options and dynamic properties using dynamic rules.

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals

Scheduled Courses

  • 12. July 2023, German
  • 06. September 2023, English
  • 04. December 2023, English

Online Training Calendar:

Load your first own car frame with all related accessories into the DigiPara Liftdesigner database!

  • Create your own parameterized car frame with all associated products
  • Set important links to necessary components (e.g. guide shoes)
  • Define important positioning points
  • Create product options and dynamic properties using dynamic rules

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals
PL1: Product Loading of BIM components

Recommended:
EL4: CAD Models & Automation
PL3: CAD Models for Product Loading

Scheduled Courses

  • 19. July 2023, German
  • 07. September 2023, English
  • 06. December 2023, English

Online Training Calendar:

Facilitate the product loading process by using CAD models!

This course aim:

  • Learn how to optimally prepare your CAD models.
  • Adapt your CAD models according to requirements and integrate this into your product library.
  • Dynamic rules help to place the CAD models always correctly.

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
EL4: CAD Models & Automation
PL1: Product Loading of BIM components

Scheduled Courses:

  • 20. July 2023, German
  • 12. September 2023, English
  • 14. December 2023, English

Online Training Calendar:

Add your first complete door package to the DigiPara Liftdesigner database!

This course aim:

  • Create your own landing and car doors in different sizes as well as related products
  • Set important links to necessary components (e.g. door fasteners)
  • Define different door installation options.
  • Create product options and dynamic properties using dynamic rules.

Scheduled Time:

2 x (9:00 – 16:00)
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals
PL1: Product Loading of BIM components

Recommended:
EL4: CAD Models & Automation
PL3: CAD Models for Product Loading

Scheduled Courses:

Load your first own drive machine into the DigiPara Liftdesigner database!

This course aim:

  • Learn the development process of a drive machine and associated components.
  • Integrate drive pulleys into your product library.
  • Provide necessary performance data in the database.

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:

A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals
PL1: Product Loading of BIM components

Recommended:
EL4: CAD Models & Automation
PL3: CAD Models for Product Loading

Scheduled Courses:

Load your first own hydraulic power unit into the DigiPara Liftdesigner database!

This course aim:

  • Create your hydraulic power unit using a simplified standard geometry.
  • Design your hydraulic power unit with complex geometry using dynamic rules.

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:

A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals
PL1: Product Loading of BIM components

Recommended:

EL4: CAD Models & Automation
PL3: CAD Models for Product Loading

Scheduled Courses:

PL7 EN

Your training material >>> coming soon

Load your first Rail Bracket into the DigiPara Liftdesigner database using your own CAD models!

This course aim:

  • Integrate your rail hanger consisting of CAD models and flexible profiles into your product library.
  • Define appropriate placement logic of your CAD models using dynamic rules.

Scheduled Time:

9:00 – 16:00
(GMT+1 Time zone, Berlin)

Requirements:
A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals
EL4: CAD Models & Automation

PL1: Product Loading of BIM components

Scheduled Courses:

Load your own predefined elevator series into the DigiPara Liftdesigner database!

This course aim:

  • Make elevator series available in the shaft wizard
  • Load the different standard sizes into your product library
  • Define the appropriate components for each size

Scheduled Time:

9:00 – 14:00
(GMT+1 Time zone, Berlin)

Requirements:

A1: DigiPara Liftdesigner Fundamentals
A2: Elevator Design Fundamentals
A4: Customization Fundamentals

Scheduled Courses: